Plastic Mould

Injection Molding Process

May 11, 2017 No Comments xsmould

Injection molding is sometimes referred to as a “net shape” manufacturing process because the molded parts emerge from the molding process in their final form with no or minmal post-processing required to further shape the product. An operating injection molding machine is depicted in Fig.1.1. The Mold is inserted and clamped between a stationary andRead More…

The importance of cooling system of PET perform mold

February 14, 2017 No Comments xsmould

The cooling system is very important for every injection mold, especially for PET preform mold. PET preform is used for stretch blow molding, it is widely used for drink industrial, cosmetic industrial, etc. The price for pet preform is very open. You can get the PET preform price from factory easily. So the cost lowerRead More…

Hot runner technique in two-shot injection mold

January 5, 2017 2 Comments xsmould

What is two-shot injection molding Two-shot injection molding is that molded part only demold one time,but it has two times injection molding, and two different plastic material been molded in one set injection machine. This is also called double color molding,usually finished by one set mold,and need special two-shot injection molding machine. Two-shot injectionRead More…

Techniques of selecting plastic mold material

November 15, 2016 No Comments xsmould

The working condition of plastic mold is different with cold-punching mold,normally under working on 150-200℃,not only bearing pressure,but also sustain high temperature.Nowadays,according to the differences of plastic mold using condition and tooling method,the followings are the basic performance requests to plastic mold steel. excellent machinability Most plastic molds,except EDM tooling,it need cutting machining andRead More…

What diameter of orifice should we design for different capacity extrusion blow molding (EBM)?

October 12, 2016 No Comments xsmould

The proper size of orifice diameter is very important for extrusion blow molding (EBM). Large air inlet orifices provide high blowing air pressure. As high a blowing air pressure as possible is desirable to give both minimum blow time (resulting in higher production cycle rates) and finished products that faithfully reproduce the mold surfaces. OftenRead More…

Where is the future of mold industrial?

October 9, 2016 No Comments xsmould

Where is the future of mold industrial? This is what every body who working with mould industrial should think. More and more robots are used in the injection molding, but few robot can be used to make mold. But artificial intellegence developing very fast, one day we can not see human labor working in theRead More…

plastic pail mould,plastic bucket mould,pail drum mould by XS MOULD

September 27, 2016 No Comments xsmould

Plastic pail mould,plastic bucket mould,pail drum mould by XS Mould In our daily life,lots of plastic household utensils are made by plastic injection molding,such as plastic pail drums,plastic basins,etc.Even though plastic pail mould structure is not complex,but if want to make a nice plastic pail mould,it is not a easy job.We can say if theRead More…

Xs Plastic Mould Co., Ltd enterprise culture

September 26, 2016 No Comments xsmould

“Innovation, Entrepreneurship, Service, Technology” is Xs Plastic Mould Co., Ltd corporate culture. “Innovation” – as a plastic mould, stamping die, and packing industrial machine manufacturer, every new project from client is different with before. All of our products are customized according customer’s requirement, we keeping creating news all the time. Xs Mould borned with “innovation”. “Entrepreneurship” – the famousRead More…

Main performance requests of plastic mould

September 18, 2016 1 Comment xsmould

XS Mould would like to introduce main performance requests of plastic mould 1.Thermostability With the coming of high speed injection machines,the speed of producing plastic parts is getting very fast.The molding temperature normally around 160-350°，sometimes the plastic material flow is not good,but molding too fast,it makes the mould part surface temperature exceed 400℃ in aRead More…

Six basic ways to improve mould quality

September 13, 2016 No Comments xsmould

The competition of manufacturing industry is becoming more and more intense all over the world.Enterprises do their best to offer individul&high quality product for clients in a short time efficiently&low-costly. Mould quality directly influence part quality,output,cost,etc. So how to improve the mould quality? 1.Develope high grade alternative mould steel Steel is a product thatRead More…

China mould _ plastic mould manufacture – Xs Plastic Mould Co., Ltd

September 10, 2016 3 Comments xsmould

Xs Plastic Mould Co., Ltd is a professional plastic mould manufacture in China. We have more than 10 years experience in making plastic mould. Before 2009 Xs Plastic Mould is just a small China mould tool room. We have registered Xs Plastic Mould Co., Ltd to extend our business. So from official document, our factory history is short,Read More…

Xs Mould Tooling Machine

Package Machine

Our Services

Injection Mould

Blow Mould

Stamping Mould

Package Machines

Xs Plastic Mould Co., Ltd Business

Xs Plastic Mould Co., Ltd provide plastic moulds: include plastic auto part mould, household mould, commodity mould, furniture mould, crate mould, cap mould, pet preform mould, blow mould, etc.

Stamping mould: one step stamping mould and progressive stamping mould. Xs Plastic Mould Co., Ltd empolyed stamping mould expert, and we stamping machine ourself to insure we can test the die any time when we need.

Machines: cap slitting machine, cap rubber patch machine, PET stretch blow molding machine, cap edge folding machine, etc.

You can check more details about them from website: http://www.xsplasticmould.com.

Our Recent Posts