+86 576 84407662 sales@xsplasticmould.com

Injection Molding Process

Injection molding is sometimes referred to as a “net shape” manufacturing process because the molded parts emerge from the molding process in their final form with no or minmal post-processing required to further shape the product. An operating injection molding machine is depicted in Fig.1.1. The Mold is inserted and clamped between a stationary andRead More…

PET preform   The cooling system is very important for every injection mold, especially for PET preform mold. PET preform is used for stretch blow molding, it is widely used for drink industrial, cosmetic industrial, etc. The price for pet preform is very open. You can get the PET preform price from factory easily. SoRead More…

                                                                    Two shot injection mold|XS Plastic Mold     What is two-shot injection molding Two-shot injection molding is that molded part onlyRead More…

  The working condition of plastic mold is different with cold-punching mold,normally under working on 150-200℃,not only bearing pressure,but also sustain high temperature.Nowadays,according to the differences of plastic mold using condition and tooling method,the followings are the basic performance requests to plastic mold steel. excellent machinability Most plastic molds,except EDM tooling,it need cutting machining andRead More…

The proper size of orifice diameter is very important for extrusion blow molding (EBM). Large air inlet orifices provide high blowing air pressure. As high a blowing air pressure as possible is desirable to give both minimum blow time (resulting in higher production cycle rates) and finished products that faithfully reproduce the mold surfaces. OftenRead More…

Where is the future of mold industrial? This is what every body who working with mould industrial should think. More and more robots are used in the injection molding, but few robot can be used to make mold. But artificial intellegence developing very fast, one day we can not see human labor working in theRead More…

Plastic pail mould,plastic bucket mould,pail drum mould by XS Mould In our daily life,lots of plastic household utensils are made by plastic injection molding,such as plastic pail drums,plastic basins,etc.Even though plastic pail mould structure is not complex,but if want to make a nice plastic pail mould,it is not a easy job.We can say if theRead More…

“Innovation, Entrepreneurship, Service, Technology” is Xs Plastic Mould Co., Ltd corporate culture. “Innovation” – as a plastic mould, stamping die, and packing industrial machine manufacturer, every new project from client is different with before. All of our products are customized according customer’s requirement, we keeping creating news all the time. Xs Mould borned with “innovation”. “Entrepreneurship” – the famousRead More…

 XS Mould would like to introduce main performance requests of plastic mould 1.Thermostability With the coming of high speed injection machines,the speed of producing plastic parts is getting very fast.The molding temperature normally around 160-350°,sometimes the plastic material flow is not good,but molding too fast,it makes the mould part surface temperature exceed 400℃ in aRead More…

  The competition of manufacturing industry is becoming more and more intense all over the world.Enterprises do their best to offer individul&high quality product for clients in a short time efficiently&low-costly. Mould quality directly influence part quality,output,cost,etc. So how to improve the mould quality? 1.Develope high grade alternative mould steel Steel is a product thatRead More…


Scroll to Top